Webchrony. The platform is an embedded box with no RTC. When it boots, I start gpsd, set the local clock to the current time using the gps signal, and then start chrony. Sometimes chrony will sync to gpsd, sometimes it won't. I can't find a pattern or anything useful to diagnose. I'm sort of throwing things against a wall and seeing what sticks. SHM0 Webreceiver set to 500ms, and the chrony configuration: refclock SHM 0 refid GPS precision 1e-1 offset 0.065 refclock PHC /dev/ptp3:extpps:nocrossts refid PPS width 0.5 precision 1e-7 Chrony is quite happy with the PPS refclock now, but not so happy with the GPS refclock; I'll have to discuss that with the gpsd team. ***@edge21-b:~# chronyc sources
How to Install and Configure Chrony - Liquid Web
WebDec 12, 2016 · You have to use chronyc makestep in your terminal to sync your system time immediately. See the documentation for chrony: Normally chronyd will cause the system to gradually correct any time offset, by slowing down or speeding up the clock as required. WebJun 8, 2024 · The gpsd/chrony docs clearly state that you need a PPS.. GPSD, NTP and a GPS receiver supplying 1PPS (one pulse-per-second) output can be used to set up a high-quality NTP time server. The list of compatible hardware also lists ublox-8 devices, but IIRC when I ordered mine the important bit was to get those devices that have the PPS signal … pop the girl
Installing and running time synchronization, with chrony
WebAug 26, 2016 · To install GPSD: sudo apt-get install gpsd. The config file in /etc/default/gps should be edited using the dpkg command to set baud rate and the port of the GPS device. We now need to edit the chrony config file /etc/crony/crony.cong on the main computer: If the robot will ever connect to the internet: WebJun 6, 2024 · server ntp.lab.int iburst allow 192.168.0.0/24 driftfile /var/lib/chrony/drift makestep 1.0 3 rtcsync keyfile /etc/chrony.keys leapsectz right/UTC logdir /var/log/chrony. After configuring the time … Web477 lines (433 sloc) 14.4 KB. Raw Blame. /*. * ntpshm.c - put time information in SHM segment for xntpd, or to chrony. *. * struct shmTime and getShmTime from file in the xntp distribution: * sht.c - Testprogram for shared memory refclock. *. * Note that for easy debugging all logging from this file is prefixed. shark boxer shorts